Kit Components
A truly complete conversion from automatic, combining the Keisler PerfectFitTM transmission system with all of the correct matched accessory parts that have been carefully selected and tested by Keisler for guaranteed quality and performance.
Drivetrain component selection and installation instruction and support is critical to get the job done right. Rest assured, buying from Keisler - the leader in manual transmission systems - is the first step in the best driving improvement you will make to your Chevelle, El Camino, GTO, or other GM A-Body.
1. TRANSMISSION - NEW TREMEC TKO-500 (500 HP/500 FT-LB), customized by Keisler to fit your 1964 - 1967 GM A-Body. A number of custom features are included (with no hidden charges) that you won't find anywhere else, including:
- Shifter location custom designed for your 1964-1967 GM A-Body.
- With the Keisler-modified top cover and tail housing, MINIMAL or NO CUTTING of the tunnel is required (after fitment of the factory 4-speed tunnel hump). A KEISLER EXCLUSIVE FEATURE!
- Works with your original carpet and console.
- Custom short-throw internal shifter mechanism designed to provide better-than-stock shifting.
- Muncie / Borg-Warner GM bolt pattern and input shaft configuration for direct bolt-in installation.
- Gear Ratios: 3.27 1st, 1.98 2nd, 1.34 3rd, 1.00 4th, .68 5th; 3.00 reverse.
- Low RPM Cruising - 32% drop in engine RPM in 5th gear (check out our Speed Analyzer).
- Precision Assembled, TRIPLE Quality Checked - assembled at Keisler by our trained technicians; 100% inspected for function, leak and visual appearance (check us out) .
- Nation-Wide Parts & Service - Parts in-stock; service in-house.
2. PILOT BEARING - Needle Roller Bearing for long life and high capacity.
3. ISOLATOR - Heavy-duty rubber isolator. Polyurethane upgrade available.
4. BACK-UP LIGHT WIRING HARNESS - Easy coupling to factory wiring.
5. NEUTRAL SAFETY START SWITCH - Can be wired into starter circuit if desired.
6. SPEEDOMETER CABLE & DRIVEN GEAR - Mechanical speedometer cable and correct driven gear PLUS integrated 2-wire electronic output included. Optional electronic wiring harness also available (for use with electronic speedometers or EFI).
7. DRIVESHAFT - Lightweight high strength steel, automatic welded and computer dynamic balanced with premium solid sealed U-joints, painted satin black, certified and serialized. Built in-house on Hines driveshaft manufacturing cell for the ultimate in quality and craftsmanship!
8. SLIP YOKE - Heavy duty Spicer slip yoke.
9. FACTORY 4-SPEED TUNNEL HUMP - Must be installed for proper fitment of the Keisler 5-speed.
10. TUNNEL TEMPLATE AND SHEETMETAL - Marking template shows you exactly where to cut your tunnel if needed, and replacement sheetmetal pre-cut to the correct size and shape is provided.
11. INSTALLATION HARDWARE KIT - High strength Grade 5 and 8 fasteners, properly sorted, bagged and labeled for easy reference.
12. BELLHOUSING - Keisler designed & manufactured reproduction of the 11 inch '621' bellhousing. Made in USA of high strength cast aluminum-titanium construction, 50% thicker wall construction than factory, CNC machined; available for all Chevy V8s and GM LS engines.
13. BELLHOUSING INSPECTION COVER - stamped steel, black powder paint; genuine GM.
14. FLYWHEEL - Billet steel flywheel, computer balanced.
15. FLYWHEEL BOLTS - Grade 8+ specialty flywheel bolts; with locking washers.
16. CLUTCH KIT - Modern pedal effort diaphragm Performance Clutch Kit incl: computer balanced pressure plate, premium sprung hub Clutch Disk (with latest technology environment friendly friction material), sealed release bearing, lube pack.
17. CLUTCH BOLTS - Grade 8+ specialty clutch bolts.
18. PEDAL KIT - New reproduction pedal assembly with rubber pads.
19. MECHANICAL CLUTCH ACTUATOR LINKAGE KIT (Original Type) - clutch pedal pushrod, z-bar, return linkage, springs, clips, pivot ball (if required), frame bracket for pivot ball.
19(opt). OPTIONAL HYDRAULIC CLUTCH ACTUATOR KIT (Modern Type, Recommended) - OEM reliability, high quality exclusive Keisler design; easier pedal effort than mechanical type; installs much easier than mechanical actuator, with no linkage required; includes: 1) quick release master cylinder with ball joint and adjustable push rod, 2) single stainless steel line-set with bleeder fitting, 3) high tech OE grade concentric self-centering double-sealed hydraulic release bearing (rated at 7000 RPM), 4) bellhousing dust cover & line bracket, 5) remote clutch reservoir with fluid baffle, molded cap, 6) DOT approved low pressure line, and 7) installation instructions.
20. SHIFTER HANDLE - Authentic looking, tapered round shank chrome handle, designed & manufactured by Keisler Engineering, features "TKO" with Keisler logo; or aftermarket Hurst handle also available.
21. KNOB - Classic white or black knob with shift pattern embossed; optional knobs: Keisler 3D in white or black.
22. SHIFT BOOT - Molded rubber shift boot with chrome trim ring.
23. INSTALLATION MANUAL - Highly illustrated step-by-step instruction manual.
24. 3 YEAR WARRANTY - 2 years to activate (in case you are restoring a car)! Extended warranty available at extra cost. Best Customer Support in the Industry.
100% Customer Satisfaction Guaranteed
- The best Customer and Tech Support in the industry
- Lifetime Tech Support from our premier experienced staff
Store 
