Kit Components
A truly complete conversion from automatic to manual, combining the T56 Magnum transmission with all of the correct matched accessories that have been carefully selected and tested by Keisler for guaranteed quality and performance.
Drivetrain component selection and installation instruction and support is critical to get the job done right. Rest assured, buying from Keisler - the leader in manual transmission systems - is the first step in the best driving improvement you will make to your Camaro or Firebird.
1. TRANSMISSION - New TREMEC T-56 Magnum (700 HP/700 FT-LB):
- Shifter location custom very close to the original on your 1967-1969 Camaro or Firebird, requires only minor trimming of your stock shifter opening.
- Muncie / Borg-Warner GM bolt pattern and input shaft configuration for direct bolt-in installation.
- Gear Ratios:
- Close Ratio: 2.66 1st, 1.78 2nd, 1.30 3rd, 1.00 4th, 0.80 5th; 0.63 6th
- Wide Ratio: 2.97 1st, 2.10 2nd, 1.46 3rd, 1.00 4th, 0.74 5th; 0.50 6th
- Low RPM Cruising - 37% or 50% drop in engine RPM in 6th gear (check out our Speed Analyzer).
- Precision Assembled, TRIPLE Quality Checked - assembled at Keisler by our trained technicians; 100% inspected for function, leak and visual appearance check us out).
- Nation-Wide Parts & Service - Parts in-stock; service in-house.
2. CROSSMEMBER - Best on the market by providing maximum clearance for exhaust while offering an OE quality look; No-flex/No-problem rigid welded box construction design with integrated isolator perch and gusseted mounting flanges, gloss black epoxy powder paint; this is a far better product than the inexpensive bent tube type crossmembers seen elsewhere.
3. PILOT BEARING - Needle Roller Bearing for long life and high capacity.
4. ISOLATOR - Heavy-duty rubber isolator. Polyurethane upgrade available.
5. SPEEDOMETER CABLE & DRIVEN GEAR - Mechanical speedometer cable and correct driven gear PLUS integrated 2-wire electronic output included. Optional electronic wiring harness also available (for use with electronic speedometers or EFI).
6. WIRING HARNESSES - Easy coupling to factory wiring for reverse lights and reverse lock out.
7. DRIVESHAFT - Lightweight high strength steel, automatic welded and computer dynamic balanced with premium solid sealed U-joints, painted satin black, certified and serialized. Built in-house on Hines driveshaft manufacturing cell for the ultimate in quality and craftsmanship!
8. SLIP YOKE - Heavy duty Spicer slip yoke.
9. INSTALLATION HARDWARE KIT - High strength Grade 5 and 8 fasteners, properly sorted, bagged and labeled for easy reference.
10. BELLHOUSING - Heavy duty cast aluminum bellhousing with Chevrolet V8 bolt pattern.
11. FLYWHEEL - Billet steel flywheel, computer balanced.
12. FLYWHEEL BOLTS - Grade 8+ specialty flywheel bolts; with locking washers.
13. CLUTCH KIT - Modern pedal effort diaphragm Performance Clutch Kit incl: computer balanced pressure plate, premium sprung hub Clutch Disk (with latest technology environment friendly friction material), sealed release bearing, lube pack.
14. CLUTCH BOLTS - Grade 8+ specialty clutch bolts.
15. PEDAL KIT - New reproduction pedal assembly with rubber pads.
16. MECHANICAL CLUTCH ACTUATOR LINKAGE KIT (Original Type) - clutch pedal pushrod, z-bar, return linkage, springs, clips, pivot ball (if required), frame bracket for pivot ball.
16. (optional) HYDRAULIC CLUTCH ACTUATOR KIT - OEM reliability, high quality exclusive Keisler design; easier pedal effort than mechanical type; installs much easier than mechanical actuator, with no linkage required; includes: 1) quick release master cylinder with ball joint and adjustable push rod, 2) single stainless steel line-set with bleeder fitting, 3) high tech OE grade concentric self-centering double-sealed hydraulic release bearing (rated at 7000 RPM), 4) bellhousing dust cover & line bracket, 5) remote clutch reservoir with fluid baffle, molded cap, 6) DOT approved low pressure line, and 7) installation instructions.
17. SHIFTER HANDLE - Authentic looking, tapered round shank chrome handle, designed & manufactured by Keisler for Camaro & Firebird; aftermarket Hurst handle also available.
18. KNOB - Classic white or black knob with shift pattern embossed; optional knobs: Keisler 3D in white or black, or polished aluminum Tremec.
19. SHIFTER BOOT & TRIM RING - Authentic look; quality rubber accordion type boot & stamped trim ring.
20. INSTALLATION MANUAL - Highly illustrated step-by-step instruction manual.
21. 3 YEAR WARRANTY - 2 years to activate (in case you are restoring a car)! Best Customer Support in the Industry.
100% Customer Satisfaction Guaranteed
- The best Customer and Tech Support in the industry
- Lifetime Tech Support from our premier experienced staff
Store 
